Page 175 - DAC_Catalog_2021-2022
P. 175

All courses are for unit credit and apply to a De Anza associate degree unless otherwise noted.
A Automotive Technology
AUTO 50A Introduction to Automotive Principles 4 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture (48 hours total per quarter).
A selective study of the automobile’s engine systems. Knowledge and skills that are necessary for basic repair, maintenance, and troubleshooting of today’s engine systems. This course may be used to fulfill the prerequisite to the Automotive Technology Program.
AUTO 60C Automotive Ignition, Fuel and 9 Units Emission Systems
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60, 60A and 60B.
Nine hours lecture (108 hours total per quarter).
Introduction to components, subsystems, and functions of ignition, fuel delivery, carburetor, and fuel injection systems (engine management). Introduction to automotive emission controls. Basic diagnosis, service, and repair procedures. Preparation for Automotive Service Excellence (ASE) examination in Areas A6, A8, and L1.
AUTO 60D Ignition Analysis and Oscilloscope 4 1/2 Units Diagnosis
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60, 60A, 60B and 60C.
Four and one-half hours lecture (54 hours total per quarter).
Ignition system principles of operation and diagnosis. Use of electronic test equipment in ignition system diagnosis. Preparation for Automotive Service Excellence (ASE) certification examinations in Areas A6, A8, and L1.
AUTO 60E Automotive Fuel Injection 4 1/2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60, 60A, 60B, 60C and 60D.
Four and one-half hours lecture (54 hours total per quarter).
Theory of operation and service of electronic fuel injection systems. Component parts and their functions and overall system theory. Diagnostic and repair methods using standard test and repair equipment. Preparation for Automotive Service Excellence (ASE) examination in Areas A8 and L1.
AUTO 60F No-Start Diagnosis 4 1/2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60, 60A, 60B, 60C, 60D and 60E.
Four and one-half hours lecture (54 hours total per quarter).
Principles of troubleshooting procedures and techniques to analyze and repair of “no-start” problems in the fuel, ignition, and electrical systems of an automobile. Preparation for Automotive Service Excellence (ASE) examination in Areas A6, A8, and L1.
AUTO 60G Advanced Scan Tool Diagnosis 4 1/2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60, 60A, 60B, 60C, 60D and 60E.
Four and one-half hours lecture (54 hours total per quarter).
Advanced drivability diagnosis using a scan tool. Using the onboard diagnostic capabilities of vehicles built since 1980. Advanced scan data analysis. Using PC capabilities to store and analyze diagnostic information. Preparation for Automotive Service Excellence (ASE) examination in Areas A6, A8, and L1.
AUTO 60H Advanced Drivability and Onboard 4 1/2 Units Diagnostics
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60, 60A, 60B, 60C, 60D and 60E.
Four and one-half hours lecture (54 hours total per quarter).
Survey of onboard diagnostic systems from 1980 to the present. Advanced electronic diagnostic procedures using an automotive scan tool. Preparation for Automotive Service Excellence (ASE) examination in Areas A6, A8, and L1.
AUTO 60J Advanced Lab Scope and 4 1/2 Units Waveform Diagnosis
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60, 60C, 60D, 60E, 60F and 60G.
Four and one-half hours lecture (54 hours total per quarter).
Diagnosis of automotive electronic systems using a laboratory oscilloscope and a power graphing meter. Related use of other basic test equipment, including a digital multi-meter (DMM) and scan tool. Advanced waveform analysis. Preparation for Automotive Service Excellence (ASE) examination in Areas A6, A8, and L1.
AUTO 60K Automotive Body Electrical Systems 4 1/2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 60A and AUTO 60B.
Four and one-half hours lecture (54 hours total per quarter).
Theory of operation for body electrical, electronic, and electromechanical systems. Understanding the functions of automotive body electrical systems. Utilization of special diagnostic equipment for body electrical systems and subsystems. Appropriate repair protocol for applied body electrical systems. Symptom to system diagnosis. Preparation for Automotive Service Excellence (ASE) examination in Area A6.
 AUTO 50B Applied Automotive Principles
2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A (may be taken concurrently).
One and one-half hours lecture, two and one-half hours laboratory (48 hours total per quarter).
Basic experiences in automotive repair and maintenance as related to the engine and its supporting systems.
AUTO 51A Introduction to Automotive Principles - Chassis Systems
4 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Four hours lecture (48 hours total per quarter).
A selective study of the automobile’s chassis and drive line systems. Knowledge and skills necessary for basic repair, maintenance, and troubleshooting of today’s chassis and drive line systems. Can be used to fulfill the prerequisite to the Automotive Technology Program.
AUTO 51B Applications of Automotive Principles - Chassis Systems
2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 51A (may be taken concurrently).
One and one-half hours lecture, two and one-half hours laboratory (48 hours total per quarter).
Basic experiences in automotive repair and maintenance as related to suspension, steering, braking, and drive line components.
AUTO 53A Automotive Mechanisms 4 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. Three hours lecture, three hours laboratory (72 hours total per quarter).
The application of physical principles to the operation of mechanical and hydraulic systems, using an applied physics technique.
AUTO 53B Automotive Electromechanical Systems 2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent. One and one-half hours lecture, two and one-half hours laboratory (48 hours total per quarter).
Principles of electricity, electronics, circuits, cranking and charging systems. Testing, diagnosis and repair of these systems.
AUTO 57A Career Research and Employment in 2 Units the Automotive Industry
Advisory: EWRT 211 and READ 211, or ESL 272 and 273.
Two hours lecture (24 hours total per quarter).
Career research in the automotive industry: job search, applications, and resumes, employer-employee relationships, job interviews.
AUTO 60 Automotive Electrical Systems 9 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A and AUTO 50B.
Nine hours lecture (108 hours total per quarter).
Principles of electricity, electronics, cranking and charging systems. Testing, diagnosis and repair of these systems.
AUTO 60A Electrical Schematic Diagnosis 4 1/2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 60.
Four and one-half hours lecture (54 hours total per quarter).
Theory of operation for electrical, electronic, and electromechanical accessory systems. Understanding and using wiring diagrams, schematics, and other diagnostic information to troubleshoot electrical, electronic, and electromechanical systems. Preparation for Automotive Service Excellence (ASE) examination in Areas A6, A8, and L1.
AUTO 60B Automotive Electronics 4 1/2 Units
Advisory: EWRT 211 and READ 211, or ESL 272 and 273; MATH 212 or equivalent; AUTO 50A, 50B, 60 and 60A.
Four and one-half hours lecture (54 hours total per quarter).
Application of computer control principles to automotive systems. Operation of automotive electronic control systems, including commonly used sensors, actuators, and displays. Introduction to diagnostic methods and test equipment for automotive electronic control systems. Preparation for Automotive Service Excellence (ASE) examination in Areas A6, A8, and L1.
174
2O21-2O22 DE ANZA COLLEGE CATALOG
























   173   174   175   176   177